Copyright (C) 1999, 2000 Bruce Tenison
Portions Copyright (C) 1999, 2000 David Nelson
Thanks to David Nelson for guidance and the usage of the scanner.txt and scanner.c files to model our driver and this informative file.
Mar. 2, 2000
- Initial Revision
This README will address issues regarding how to configure the kernel to access a RIO 500 mp3 player. Before I explain how to use this to access the Rio500 please be warned:
Please note that this software is still under development. The authors are in no way responsible for any damage that may occur, no matter how inconsequential.
It seems that the Rio has a problem when sending .mp3 with low batteries. I suggest when the batteries are low and you want to transfer stuff that you replace it with a fresh one. In my case, what happened is I lost two 16kb blocks (they are no longer usable to store information to it). But I don't know if that's normal or not; it could simply be a problem with the flash memory.
In an extreme case, I left my Rio playing overnight and the batteries wore down to nothing and appear to have corrupted the flash memory. My RIO needed to be replaced as a result. Diamond tech support is aware of the problem. Do NOT allow your batteries to wear down to nothing before changing them. It appears RIO 500 firmware does not handle low battery power well at all.
On systems with OHCI controllers, the kernel OHCI code appears to have power on problems with some chipsets. If you are having problems connecting to your RIO 500, try turning it on first and then plugging it into the USB cable.
A host with a USB port running a Linux kernel with RIO 500 support enabled.
The driver is a module called rio500, which should be automatically loaded as you plug in your device. If that fails you can manually load it with
Udev should automatically create a device node as soon as plug in your device. If that fails, you can manually add a device for the USB rio500:
mknod /dev/usb/rio500 c 180 64
In that case, set appropriate permissions for /dev/usb/rio500 (don't forget about group and world permissions). Both read and write permissions are required for proper operation.
That's it. The Rio500 Utils at: http://rio500.sourceforge.net should be able to access the rio500.
You can use only a single rio500 device at a time with your computer.